To set indicators for sloped and offset piping

Specify how you want slopes and skews to be identified in the isometric drawing.

  1. On the ribbon, click Home tab Project panel Project Manager Project Setup.
  2. In the Project Setup dialog box, expand Isometric DWG Settings. Click Slopes and Skews.
  3. On the Sloped Lines pane, in the Iso Style list, select an iso style.
  4. Under Sloped Piping, do the following:
    • Under Show Falls as, select a falls behavior option from the drop-down list. Options include Angle, Ratio, Percentage, Gradient, Imperial Incline, Metric Incline, or Suppress Falling Line Indication.
    • Under Show as fall up to, select a value from the drop-down list or enter a value to specify the maximum value at which falls display.
  5. Under Offset Piping, do the following:
    • Under Show 2D Vertical/Horizontal Offsets As, click Skew Box, Skew Triangle + Normal Dimensioning, or Skew Triangle + Alternative Dimensioning.
    • Under Show Pipe With a 2D Horizontal Offset As, click 2D Triangle + Fall Indicator. 3D Box, or Two Skew Triangles.
    • Under Show 3D Skews as, click 3D Box or Two Skew Triangles.
  6. Click OK.