© 2013 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose.
Certain materials included in this publication are reprinted with the permission of the copyright holder.
Portions relating to JTOpen Toolkit v.6.3 are licensed from Siemens Product Lifecycle Management Software Inc.
Open Inventor code is copyright SGI. All rights reserved. This Autodesk software contains Open Inventor. Open Inventor is licensed under the GNU Lesser General Public License v.3.0, which can be found at http://www.gnu.org/licenses/gpl.html. A text copy of this license and the source code for Open Inventor (and modifications made by Autodesk, if any) are included on the DVD or with the download of this Autodesk software. You may modify, debug and relink Open Inventor to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.3.0.
Portions relating to libjpeg software v. 6b are copyright © 1991-2010, Thomas G. Lane, Guido Vollbeding. All Rights Reserved. This software is based in part on the work of the Independent JPEG Group.
This Autodesk software contains DevIL v.1.7.8. DevILis licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/old-licenses.html#GPL. A text copy of this license and the source code for DevIL v. v.1.7.8 (and modifications made by Autodesk, if any) are included on the DVD or with the download of this Autodesk software. You may modify, debug and relink DevIL to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.
Portions related to Qt MFC Migration Framework are Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies). This Autodesk software contains Qt MFC Migration Framework v.2.8, as modified by Autodesk, Inc.. Qt MFC Migration Framework is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain a copy of the source code for Qt MFC Migration Framework v.2.8, as modified by Autodesk, Inc., from www.autodesk.com/lgplsource or by sending a written request to:
Autodesk, Inc., Attention: General Counsel, Legal Department, 111 McInnis Parkway, San Rafael, CA 94903
Your written request must:
Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and Identify
1. This Autodesk software name and release number;
2. That you are requesting the source code for Qt MFC Migration Framework v.2.8, as modified by Autodesk, Inc.; and
3. The above URL ( www.autodesk.com/lgplsource
so that Autodesk may properly respond to your request. The offer to receive this Qt MFC Migration Framework source code, as modified by Autodesk, Inc., via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software.
You may modify, debug and relink Qt MFC Migration Framework to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.
Portions related to Qt v.4.8.2 are Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies). All rights reserved. This Autodesk software contains Qt v. 4.8.2, as modified by Autodesk. Qt is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt . A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain a copy of the source code for Qt v. 4.8.2, as modified by Autodesk, from www.autodesk.com/lgplsource or by sending a written request to:
Autodesk, Inc., Attention: General Counsel, Legal Department, 111 McInnis Parkway, San Rafael, CA 94903
Your written request must:
Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and Identify
1. This Autodesk software name and release number;
2. That you are requesting the source code for Qt v. 4.8.2, as modified by Autodesk, Inc.; and
3. The above URL ( www.autodesk.com/lgplsource
so that Autodesk may properly respond to your request. The offer to receive this Qt v. source code, as modified by Autodesk, Inc., via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software.
You may modify, debug and relink Qt to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.
This Autodesk software contains Qt Cryptographic Architecture v. 2.0.2 (QCA). QCA is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt. A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain a copy of the source code for QCA v 2.0.2 from www.autodesk.com/lgplsource or by sending a written request to:
Autodesk, Inc., Attention: General Counsel, Legal Department, 111 McInnis Parkway, San Rafael, CA 94903
Your written request must:
Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and Identify
1. This Autodesk software name and release number;
2. That you are requesting the source code for QCA v 2.0.2, as modified by Autodesk, Inc.; and
3. The above URL ( www.autodesk.com/lgplsource
so that Autodesk may properly respond to your request. The offer to receive this QCA source code, as modified by Autodesk, Inc., via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software.
You may modify, debug and relink QCA to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.
Portions relating to JPEG software is copyright © 1991-1998, Thomas G. Lane. All Rights Reserved. This software is based in part on the work of the Independent JPEG Group.
libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright (c) 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-0.96, with the following individuals added to the list of Contributing Authors:
Tom Lane Glenn, Randers-Pehrson, Willem van Schaik
libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to the list of Contributing Authors:
John Bowler, Kevin Bracey, Sam Bushell, Magnus Holmgren, Greg Roelofs, Tom Tanner
The PNG Reference Library is supplied "AS IS". The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc. assume no liability for direct, indirect, incidental, special, exemplary, or consequential damages, which may result from the use of the PNG Reference Library, even if advised of the possibility of such damage.
Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any purpose, without fee, subject to the following restrictions:
1. The origin of this source code must not be misrepresented.
2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source.
3. This Copyright notice may not be removed or altered from any source or altered source distribution.
The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code as a component to supporting the PNG file format in commercial products. If you use this source code in a product, acknowledgment is not required but would be appreciated.
Portions related to LuaPlus v5.1 are Copyright © 1994-2008 Lua.org, PUC-Rio.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Portions relating to OpenEXR 1.6.0 Copyright© 2004, Industrial Light & Magic, a division of Lucas Digital Ltd. LLC All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of Industrial Light & Magic nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Portions relating to TIFF© Copyright 1988-1997 Sam Leffler. ©Copyright 1991-1997 Silicon Graphics, Inc. All rights reserved. Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that (i) the above copyright notices and this permission notice appear in all copies of the software and related documentation, and (ii) the names of Sam Leffler and Silicon Graphics may not be used in any advertising or publicity relating to the software without the specific, prior written permission of Sam Leffler and Silicon Graphics.
THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR ANY SPECIAL, INCIDENTIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABIBITLY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Portions relating to Libxerces-c 2.7.0 are copyright 1999-2000, 2004 The Apache Software Foundation. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0. Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
This product includes the SwiftShader Software GPU Toolkit, Copyright (c) 2003-2011 Transgaming, Inc. All rights reserved.
Except where otherwise noted in the source code (e.g. the files hash.c, list.c and the trio files, which are covered by a similar license but with different Copyright notices) all the files related to libxml are: Copyright (C) 1998-2003 Daniel Veillard. All Rights Reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE DANIEL VEILLARD BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CON NECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of Daniel Veillard shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from him.
PCRE LICENSE
PCRE is a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language.
Release 8 of PCRE is distributed under the terms of the "BSD" licence, as specified below. The documentation for PCRE, supplied in the "doc" directory, is distributed under the same terms as the software itself.
The basic library functions are written in C and are freestanding. Also included in the distribution is a set of C++ wrapper functions
BASIC LIBRARY FUNCTIONS:
Written by: Philip Hazel, Email local part: ph10, Email domain: cam.ac.uk, University of Cambridge Computing Service, Cambridge, England
Copyright © 1997-2010 University of Cambridge. All rights reserved.
THE C++ WRAPPER FUNCTIONS:
Contributed by: Google Inc., Copyright © 2007-2010, Google Inc., All rights reserved.
THE "BSD" LICENSE
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
* Neither the name of the University of Cambridge nor the name of Google Inc. nor the names of their contributors may be used to endorse or promote products derived from this software without specific prior written permission
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This work contains the following software owned by Siemens Industry Software Limited:
D-Cubed™2D DCM © 2012. Siemens Industry Software Limited. All Rights Reserved.
libpng © 1995-2010 Glenn Randers-Pehrson. Contributing Authors: John Bowler, Kevin Bracey, Sam Bushell, Simon-Pierre Cadieux, Andreas Dilger, Magnus Holmgren, Tom Lane, Dave Martindale, Eric S. Raymond, Greg Roelofs, Guy Eric Schalnat, Paul Schmidt, Tom Tanner, Cosmin Truta, Willem van Schaik, Gilles Vollant, and Tim Wegner.
RSA Data Security, Inc., MD5 Message-Digest Algorithm © 1991-2007 RSA Data Security, Inc. All rights reserved. RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability of this software for any particular purpose. It is provided "as is" without express or implied warranty of any kind.
uuencode/uudecode© 1983-2006 Regents of the University of California. All rights reserved.
Portions relating to DirectX SDK v.43 are © 1981-2010 Microsoft Corp. All rights reserved.
7-Zip Copyright (C) 1999-2012 Igor Pavlov.
This Autodesk software contains 7-zip. 7-zip is licensed under the GNU Lesser General Public License v.2.1, which can be found at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt . A text copy of this license is included on the media provided by Autodesk or with the download of this Autodesk software. You may obtain a copy of the source code for 7-zip from www.autodesk.com/lgplsource or by sending a written request to:
Autodesk, Inc., Attention: General Counsel, Legal Department, 111 McInnis Parkway, San Rafael, CA 94903
Your written request must:
Contain a self-addressed CD/DVD mailer (or envelope sufficiently large to hold a DVD) with postage sufficient to cover the amount of the current U.S. Post Office First Class postage rate for CD/DVD mailers (or the envelope you have chosen) weighing 5 ounces from San Rafael, California USA to your indicated address; and Identify
1. This Autodesk software name and release number;
2. That you are requesting the source code for 7-zip, as modified by Autodesk, Inc.; and
3. The above URL ( www.autodesk.com/lgplsource
so that Autodesk may properly respond to your request. The offer to receive this 7-zip source code, as modified by Autodesk, Inc., via the above URL (www.autodesk.com/lgplsource) or by written request to Autodesk is valid for a period of three (3) years from the date you purchased your license to this Autodesk software.
You may modify, debug and relink 7-zip to this Autodesk software as provided under the terms of the GNU Lesser General Public License v.2.1.
Portions relating to ACIS® © 1989-2001 Spatial Corp.
Portions related to Intel® Threading Building Blocks v.4.0 are Copyright (C) 2005-2012 Intel Corporation. All Rights Reserved.
Portions related to Intel® Math Kernel Library v.10.0.3 ( www.intel.com/software/products/mkl ) are Copyright (C) 2000-2008, Intel Corporation. All rights reserved.
This Autodesk software contains the following software components licensed from Siemens Industry Software Limited:
D-Cubed™ HLM © 2012. Siemens Industry Software Limited. All Rights Reserved.
D-Cubed™ CDM © 2012. Siemens Industry Software Limited. All Rights Reserved.
Intel® Threading Building Blocks v.3.0.5 are Copyright (C) 2005-2012 Intel Corporation. All Rights Reserved.
Portions relating to Xerces-C++ v.3.1.1 are Copyright © 1999-2010 The Apache Software Foundation. All Rights Reserved. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 . Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
Portions relating to Parasolid Communicator Toolkit v.25 are Copyright 2012 Siemens Product Lifecycle Management Software Inc. All rights reserved.
Portions relating to GRANITE® Interoperability Kernel v.8.0 are Copyright © 2011 Parametric Technology Corporation and/or Its Subsidiary Companies. All Rights Reserved.
Portions relating to RODX/CAT, RODX/CAT5, and WODX/CAT5 are Copyright© CADCAM-E.COM, Inc.
Trademarks
The following are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and other countries: 123D, 3ds Max, Algor, Alias, AliasStudio, ATC, AutoCAD LT, AutoCAD, Autodesk, the Autodesk logo, Autodesk 123D, Autodesk Homestyler, Autodesk Inventor, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSketch, AutoSnap, AutoTrack, Backburner, Backdraft, Beast, BIM 360, Burn, Buzzsaw, CADmep, CAiCE, CAMduct, CFdesign, Civil 3D, Cleaner, Combustion, Communication Specification, Constructware, Content Explorer, Creative Bridge, Dancing Baby (image), DesignCenter, DesignKids, DesignStudio, Discreet, DWF, DWG, DWG (design/logo), DWG Extreme, DWG TrueConvert, DWG TrueView, DWGX, DXF, Ecotect, ESTmep, Evolver, FABmep, Face Robot, FBX, Fempro, Fire, Flame, Flare, Flint, FMDesktop, ForceEffect, FormIt, Freewheel, Fusion 360, Glue, Green Building Studio, Heidi, Homestyler, HumanIK, i-drop, ImageModeler, Incinerator, Inferno, InfraWorks, Instructables, Instructables (stylized robot design/logo), Inventor LT, Inventor, Kynapse, Kynogon, LandXplorer, Lustre, MatchMover, Maya, Maya LT, Mechanical Desktop, MIMI, Mockup 360, Moldflow Plastics Advisers, Moldflow Plastics Insight, Moldflow, Moondust, MotionBuilder, Movimento, MPA (design/logo), MPA, MPI (design/logo), MPX (design/logo), MPX, Mudbox, Navisworks, ObjectARX, ObjectDBX, Opticore, Pipeplus, Pixlr, Pixlr-o-matic, Productstream, RasterDWG, RealDWG, ReCap, Remote, Revit LT, Revit, RiverCAD, Robot, Scaleform, Showcase, ShowMotion, Sim 360, SketchBook, Smoke, Socialcam, Softimage, Sparks, SteeringWheels, Stitcher, Stone, StormNET, TinkerBox, ToolClip, Topobase, Toxik, TrustedDWG, T-Splines, ViewCube, Visual LISP, Visual, VRED, Wire, Wiretap, WiretapCentral, XSI.
All other brand names, product names or trademarks belong to their respective holders.
Disclaimer
THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY AUTODESK, INC. "AS IS." AUTODESK, INC. DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS.