Change text settings in the Technical Requirements dialog box.
|
Access: |
Ribbon: Annotate (ESKD) tab  Format panel Technical Requirements Settings
|
| Text Settings | |
| Text Height: H | Text height of a requirement line. |
| Line Spacing | Distance between lines in the Technical Requirements, in terms of H. |
| Item Spacing | Distance between items. |
| Left Indent | Indent distance for first line in item. |
| Column Width | Width of column containing the requirements. |
| Use period after numbers | Check to add a period after the item number. |
| Text Location | |
| Horizontal Offset | Horizontal offset from top left corner of the title block. |
| Vertical Offset | Vertical offset from top left corner of the title block. |
| Line Limit | Set the number of lines that appear in the requirement. |
| Alternate Text Location | |
| Horizontal Offset | Horizontal offset from top left corner of the title block. |
| Vertical Offset | Vertical offset from drawing sheet bottom border. |
| Line Limit (2nd column) | Defines the number of lines for second column. If technical requirements contain too many items which fill completely the first and second columns, the remaining items are allocated in the third column. |
| Limit for Widow/Orphan Lines | Sets the limit for widow/orphan lines. If this parameter is set to 0, there is no elimination of widow/orphan lines. |