States the number of connector views to place, enables you to change the display settings for the current session, specifies which connector views to place, and then places the connector views by the associated wire stubs using the specified offset and other display characteristics.
|
Access: |
Open a nailboard drawing and click
Place Views tab
Create panel
Connector
|
|
Offset |
Sets the distance at which to place the base views of the selected connectors from the associated wire stubs. |
|
Orientation |
Sets the orientation for the base view of the selected connectors. Click the arrow to select from the list of standard orientations. |
|
Scale |
Sets the scale of the view relative to the harness assembly. Enter the scale in the box or click the arrow to select from a list of commonly used scales. Note: You can enter a scale that is not on the list. The new scale appears above a line in the list and is available until you close Autodesk Inventor. It is not added to the scale list from the Standard style.
|
|
Style |
Sets the display style for the view. |
|
Connector list |
Lists the RefDes and Connector Name for all unplaced connectors associated with the harness assembly. Disable the check box for the connector base view to exclude. Click Select All or Clear All to include or exclude all base views. |
|
Selected |
Displays the number of connector views to place. |
Displays hidden lines in the view.
Removes hidden lines from the view.
Displays shaded model in the view.