Equally distributes wire stubs about the endpoint of a segment using the specified angle and sorting direction.
|
Access: |
Open a nailboard drawing, edit the sketch that contains the harness, and then select a wire or segment endpoint of a fanned in wire. You can also right-click and select Fan Out |
on the context menu.
 |
Clockwise arranges the wires so that pin names increase in the clockwise direction. |
 |
Counter clockwise arranges the wires so that pin names increase in the counter clockwise direction. |
|
Angle |
Specifies the total angle to distribute all wires. The angle between wire stubs is calculated based on the number of wire stubs and the angle entered. |