Bend a portion of a part.
Access
Ribbon:
3D Model tab
Modify panel
Bend Part
- Bend Line
-
The tangency line at which the existing part transitions into the deformation area of the bend feature. The line about which the feature hinges or folds.
Uses one of three input combinations to define the feature. When you select a combination from the drop-down list, the dialog box fields change dynamically.
- Radius + Angle
-
Creates a feature using values you specify. The radius defines the size of the bend curve between the two sides. The angle defines the position of the two sides.
- Radius + Arc Length
-
Creates a feature using values you specify for Radius, and Arc Length, which defines the length of the curve.
- Arc Length + Angle
-
Creates a feature using values you specify for Arc Length and Angle. The Arc Length defines the length of the curve. The angle defines the position of the two sides.
- Side
-
Flips the side of the part to bend.
- Direction
-
Flips the direction of the bend up or down.
- Bend Minimum
-
When the bend line intersects multiple portions of the part body, use to specify which portions to bend.