You use the Calculation tab to set values to perform calculation and strength check.
- Switch to the Calculation tab.
- Select Cycle Time, and enter 1 s.
- In the Follower Loads region, enter 20 N for the Force on Roller field.
- For Accelerated Weight, enter 0.010 kg.
- For Spring Rating, enter 2 N/mm.
- Enter these values for the Cam Material and Follower Material fields.
- For the Allowable Pressure field, enter 200 MPa.
- For the Modulus of Elasticity field, enter 206700 MPa.
- For the Poisson’s Ratio field, enter 0.3 ul.
- Click Calculate to perform the calculation.
The program shows the results on the right side of the Calculation tab. The inputs that fail the calculation are displayed in red (their value does not correspond with other inserted values or calculation criteria). Reports of the calculation are displayed in the Summary of Messages area. It displays when you click the chevron in the lower-right part of the Calculation tab.
Tip: Click the 
Results command in the right upper corner to open an HTML report.
Results command in the right upper corner to open an HTML report.Click OK.