Create chamfer with single distance

1. On the ribbon, click 3D Model tab Modify panel Chamfer .
2. Click the Distance command and enter the chamfer distance.
3. Select the edges to chamfer.
4. To select options, click More.
5. Set Edge Chain, then select edges.
   • Click the left button to include any tangent edges in the chamfer.
   • Click the right button to select only one edge at a time.
6. Setback. Applies when three or more intersecting edges are selected.
   • Click the left button to create a flat intersection instead of a corner.
   • Click the right button to create a pointed corner as if milled at each edge.
7. Select edges to chamfer.
8. Click OK.