Displays the measured in plane shrinkage, parallel and perpendicular to the flow direction, under a range of injection molding conditions.
If the material is shrink tested, this summary lists the following parameters:
Temperature of the melt.
Temperature of the mold.
Flow rate based of the movement of the ram.
Flow rate based on the filling of the cavity.
Diameter of the injection molding machine ram.
Stroke length of the ram.
Part thickness.
Holding pressure.
Holding time.
Cooling time.
Shrinkage parallel to the flow direction.
Shrinkage perpendicular to the flow direction.
These results are the basis for the Observed shrinkage results.