Copy of designs containing iLogic rules

Use iLogic Design Copy to copy a design containing iLogic rules. iLogic Design Copy addresses the special considerations when copying an iLogic-enabled design template.

There are two possible workflows:

Note: You can use iLogic Design Copy even if your documents do not involve iLogic rules.

Use Configure first if:

• The copy is intended as a fixed configuration and does not need the rules.
• You do not want to edit the rules on the copy.

1. Load the iLogic Design Template.
2. Define a new configuration by changing input values and firing rules.
3. Save the iLogic Design Template.
4. Run iLogic Design Copy to create a copy of the design template saved in the desired configuration state.

Use Copy first if:

• You intend to change the rules or make other changes after copying to create a new, similar iLogic template.
• You do not want to change the original design or template.

1. Run iLogic Design Copy to create a copy of the iLogic Design Template.
2. Load the copied design template.
3. Define a new configuration by changing input values and firing rules.
4. Save the copied design template.