Edit a bend note

1. Right-click a bend note, and select Edit Bend Note.
2. In the Edit Bend Note dialog box, edit the bend note text in the edit field:
   • Click Bend Direction, Bend Angle, Bend Radius, or kFactor in the Values and Symbols section to insert the corresponding property in the edit field.
   • Click the arrow next to the Insert Symbol command to select and insert a symbol.
   • If appropriate, add a stacked text in the note. Type a correct stacking sequence, select it, right-click and choose Stack. If AutoStacking is enabled, fractional numbers with a valid stacking trigger followed by a neutral character are stacked automatically as you type.
3. To change the precision of the Bend Angle, Bend Radius, and kFactor value, click Precision and Tolerance. Then change Precision and Tolerances in the Precision and Tolerance dialog box:
   • To set precision, select Use Global Precision to use precision setting defined on the Units tab of the active Dimension style. Or, cancel the selection of Use Global Precision, and select the Precision for Bend Angle, Bend Radius, and kFactor.
   • To set tolerances for Bend Angle and Bend Radius, click the More option, select the check box in the Tolerances section. Then select Method, enter the tolerance values, and select the precision.
4. Select Part Units to use the measurement units of the model. Clear the check mark to use the measurement units specified by the Dimension style.
5. Click OK to close the Edit Bend Note dialog box.

Tips (Drag Editing):

• To change position of the note along the bend centerline, click the note text and drag it along the bend centerline to the appropriate position.
• To create a leader, click the note text and drag it to an appropriate position away from the bend centerline.
  Note: The appearance of the bend note with a leader is determined by Leader Text Orientation and Leader Text Alignment settings defined in the current Dimension style.
• To create a linear extension leader, click the note text and drag it behind the endpoint of the associative bend centerline.
• To flip the bend note, click the note text and drag it in a perpendicular direction towards the bend centerline.