Create grounded work point in part file

Specify X, Y, and Z coordinates to ground a work point. The work point remains fixed in space regardless of changes to model geometry. When creating a grounded work point , in-line work features are not available.

1. On the ribbon, click 3D Model tab Work Features panel Grounded Point .
2. Click a work point, midpoint, or vertex. A pushpin cursor symbol indicates the selection is grounded.
3. The 3D Move/Rotate command displays with its axes aligned with the principal axes of the part.

   Click or drag an axis or center of the command, then enter values in the 3D Move/Rotate dialog box and click Apply. Repeat until the appropriate X, Y, and Z coordinates are defined.

Note: You can ground an associative work point, and then unground it if the point is not moved. If you move the point using the triad, you cannot change it back to an associative work point.

Show Me how to create a grounded work point

Show Me how to redefine the alignment or position of the 3D Move/Rotate command