Place the Angle Braces

Only one more selection set and we are finished with component placement. We place the angle braces using the sketch lines.

1. Select ISO 657/14 - 2000 (Square) from the Family menu.
2. Select 80x80x6.3 from the Size menu.
3. Ensure that the orientation indicator is on the center radio button, the horizontal and vertical offsets are set to 0.00 mm, and the angle is 90.00 deg.
4. Select the two angular lines.
   
5. Click Apply.
6. Click Cancel to close the Insert dialog box..

Previous | Next