Use the dialog box to enter parameters for cone as an inside shaft bore in Shaft Component Generator.
|
Access: |
Ribbon: Design tab  Power Transmission panel Shaft. On the Design tab, select Bore on the left or Bore on the right in the Sections drop-down list. On the toolbar, click Insert Conical Bore  
|
Dimensions
Enables cone dimensions editing.
Unlock the edit field to enable automatic update of the value in case you change the shaft parameters that influence that value. For example, if you lock the Length value and update the length of designed shaft, the length of the inside cone updates automatically.
|
Name |
Displays the name of the parameter. Name of the dimension is used in the Calculation tab and in the Results pane. Column is not editable. |
|
Size |
Click the Size field to insert a value, or select a value from displayed list. Click Measure from the context menu to measure dimension in the Autodesk Inventor window. Click List Parameters to display list with parameters. Click to select the parameter and insert the value to the Size edit field. Click Calculate from the context menu to automatically calculate a hollow through the length of the shaft (from a hollow on the left to a hollow on the right). Click Values from the context menu to see the list of recommended and available dimensions. |
|
Description |
Displays the description of the parameter. Name of the dimension is used in the Calculation tab and in the Results pane. Column is not editable. |
Preview
Displays schematic image of the cone section.