Create variable-radius edge fillet

1. On the ribbon, click 3D Model tab Modify panel Fillet .
2. Select Edge Fillet.
3. Click the Variable tab.
4. In the graphics window, select the first edge to fillet.
5. To add points to the edge, move the indicator along the selected edge to the point location, and click to add the point.
   Note: When you add a variable-radius fillet to a closed loop, such as the end of a cylinder, there are no start and endpoints. Add the points at which to define the radii.
6. In the Point list, select the start point, and enter its radius. Repeat for the endpoint.
7. If you added points to the edge, select each one, and enter its radius and position.
8. To add a fillet to another edge, in the Edges column, click the prompt. In the graphics window, select the edge, and define the points and radii.
Note: To change sharp edge handling, corner preference, or automatic edge chaining , click More. On the Setbacks tab, specify setbacks for intersecting fillet edges.