Build rest feature with flat landing

1. Create or import a thin-walled part.
   
2. Create the rest profile on a 2D sketch between the upper and lower faces of the thin-walled part.
   Tip: Use an Offset Work Plane for the sketch location.
   
3. On the ribbon, click 3D Model tab Plastic Part panel Rest .
4. Verify that the box in the Shape tab is set to Through All. The platform direction arrow is like the arrow shown in the following image. (For example, opposite to the appropriate clearance volume.)
   
5. You can drag the landing profile or change the landing options to specify a new distance. Click OK
6. The Rest feature is complete.