Model

Angle iMate: displays iMate defined with angle constraint.
Surface Part: displays surface part model.
Shared Surface Part: displays shared surface part model.
Part: displays the solid part model.
Blocks: contains sketch block definitions.
Block Instance: displays the associated sketch block instance.
Bend: displays the part bend feature.
Boundary Patch: displays the associated surface boundary patch.
Shared Boundary Patch: displays the surface boundary patch that different features share.
Chamfer: displays the associated chamfer feature.
Circular Pattern of Part: displays the associated circular pattern of the solid part and contains the pattern occurrences.
Circular Pattern: displays the associated circular pattern of the feature and contains the pattern occurrences.
Coil Surface: displays the associated coil surface.
Shared Coil Surface: displays the coil surface that different features share.
Coil: displays the associated solid coil feature.
Composite: displays the associated composite feature.
Shared Composite: displays the composite that different features share.
Composite iMate: displays iMate composed of multiple iMates.
End of Part Marker: bounds the features that are processed (above the marker) from features that are not (below the marker).
Decal: indicates that a decal has been placed on a model face.
Delete Face: displays the delete face feature created with the Delete Face command.
Broken Link: indicates the link between the derived and base components is broken.
Derived Part: displays the associated derived part and contains the included parts and features.
Derived Surface: displays the associated surface for the derived part.
Shared Derived Surface: displays the derived surface that different features share.
Emboss: displays the associated emboss feature.
Extend Surface: displays the associated extended surface feature.
Extrusion Surface: displays surface extrusion feature.
Shared Extrusion Surface: displays surface extrusion feature that different features shar.
Invisible Surface: displays a surface that is not visible.
Extrusion: displays solid extrusion feature.
Face Draft: displays the associated face draft feature.
Face Loop: displays the associated face loop feature.
Fillet: displays the associated fillet feature.
Flush iMate: displays iMate defined with flush constraint.
Hole: displays the associated hole feature.
Insert iMate: displays iMate defined with insert constraint.
3D Intersection: displays 3D curve created at geometry intersection.
iPart: displays associated iPart.
Disabled iPart: displays iPart that is not enabled.
Disabled Grounded iPart: displays grounded iPart that is not enabled.
Grounded iPart: displays grounded iPart.
Stitch Surface: displays the associated stitch surface feature.
Shared Stitch Surface: displays stitch surface feature that different features share.
Loft Surface: displays surface loft feature.
Shared Loft Surface: displays surface loft feature that different features share.
Loft: displays solid loft feature.
Mate iMate: displays iMate defined with mate constraint.
Mesh Feature: displays the mesh feature translated from CATIA.
Mesh Folder: contains mesh features translated from CATIA.
Mirror: displays the mirrored part or features and contains the mirror occurrences.
Move Face: displays the associated moved face feature.
Multi-body Part Folder: contains the solid bodies in a multi-body part.
Multi-body Part: displays multi-body part.
Multi-body Substitute Part: displays multi-body part designated a substitute.
Combined Solid Bodies: displays combined solid bodies.
Derived Alias: indicates geometry imported associatively from Alias wire file.
Derived Composite: displays the associated source assembly for a composite surface part.
Derived Composite Substitute: displays the associated source assembly for a composite surface part designated a substitute.
Derived Body No Seams: displays derived body with merged seams between planar faces.
Derived Body with Seams: displays derived body with seams between planar faces.
Derived Separate Bodies: displays multiple separate derived bodies.
Derived Body No Seams Substitute: displays derived body with merged seams between planar faces designated a substitute.
Derived Body with Seams Substitute: displays derived body with seams between planar faces designated a substitute.
Derived Separate Bodies Substitute: displays multiple separate derived bodies designated a substitute.
Derived Surface Substitute: displays the associated source for a work surface part designated a substitute.
Derived Work Body: displays the associated source for a work surface part.
Derived Box: displays a bounding box body representative of the derived component.
Derived Cut: indicates that the component was subtracted from the derived part.
Derived Intersect: displays the solid created from the intersection of the associated component and the other solid components.
Derived Include: displays the section of the associated component included in the derived part.
Dummy Body: displays the placeholder node in a combined solid body.
Origin Plane: displays the associated model origin plane.
Origin Point: displays the model origin point.
Pattern Occurrence: displays feature or part occurrence in the pattern.
Pattern Occurrence Independent: indicates that the pattern occurrence is set to independent relative to the pattern.
Rectangular Pattern of Part: displays the associated rectangular pattern of the solid part and contains the pattern occurrences.
Rectangular Pattern: displays the associated rectangular pattern of the feature and contains the pattern occurrences.
Replace Face: displays the associated replace face feature.
Revolve Surface: displays surface revolve feature.
Shared Revolve Surface: displays surface revolve feature that different features share.
Revolve: displays solid revolve feature.
Rib: displays the associated rib feature.
Rotation iMate: displays iMate defined with rotation motion constraint.
Rotation-Translation iMate: displays iMate defined with rotation-translation motion constraint.
Sculpt: displays the associated sculpt feature.
Shell: displays the associated shell feature.
Shrinkwrap Part: displays the associated source assembly for a composite surface shrinkwrap part.
Solid Body: displays single body part.
Consumed Solid Body: displays the consumed solid body in a combined solid.
Split: displays the associated split feature.
Surface Body Part Folder: contains the surface bodies in a part.
Sweep Surface: displays surface sweep feature.
Shared Sweep Surface: displays surface sweep feature that different features share.
Sweep: displays solid sweep feature.
Table Folder: organizes iPart or iAssemblymembers in the browser based on the keys chosen in the author tables. Icons are shown when List by Keys is selected in the context menu.
Table Item: activates the iPart or iAssemblymember. The active member is shown with a check mark.
Table: accesses iPart or iAssemblyauthors.
Tangent iMate: displays iMate defined with tangent constraint.
Thicken Surface: displays surface thicken feature.
Shared Thicken Surface: displays surface thicken feature that different features share.
Thicken: displays solid thicken feature.
Thread: displays the associated thread feature.
Transform: displays a body move.
Trim Surface: displays the surface created with the trim surface command.
UCS (User Coordinate System): displays a user-defined coordinate system.
iFeature: displays the associated iFeature.
Grounded Work Axis: displays a work axis with all degrees of freedom removed.
Shared Grounded Work Axis: displays a grounded work axis that different features share.
Work Axis: displays a construction geometry axis used to facilitate the creation of part features.
Shared Work Axis: displays a work axis that different features share.
Grounded Work Plane: displays a work plane with all degrees of freedom removed.
Shared Grounded Work Plane: displays a grounded work plane that different features share.
Work Plane: displays a construction geometry plane used to facilitate the creation of part features.
Shared Work Plane: displays a work plane that different features share.
Grounded Work Point: displays a work point with all degrees of freedom removed.
Shared Grounded Work Point: displays a grounded work point that different features share.
Work Point: displays a construction geometry point used to facilitate the creation of part features.
Shared Work Point: displays a work point that different features share.