|
|
- On the ribbon, click
Environments tab
Begin panel
BIM Exchange
.
- On the BIM Exchange tab Author panel , click Conduit Connector ,
or
In the browser, expand the MEP System Connections icon, right-click on the Conduit node, and click Add Connector.
- In the Conduit Connector dialog box, select a shape for the connector.
Note: If you select Undefined, you can select any oval, circular, or rectangular face.
- Select a face to place and position the connector. The location of the connector appears as a cylindrical arrow on the selected Autodesk Inventor part or assembly.
If necessary, click the Direction command to reverse the connector direction. Note: Connectors do not indicate direction. They indicate a mating face or plane. Generally, connectors should point away from the solid body component face or opening.
- Optionally, clear the Inferred check box next to the size box, and enter a value.
If the box is not selected, the size values are static. If selected, the size values are linked to the size of the selected face.
- On the Connection Type drop-down list, click the connection type.
- To continue to add connectors, click Apply. To create the connector and close the dialog box, click OK.
|
