Create Wire Run List Reports

Modify the sample wire run list report to include more information, including link types.

1. If Report Generator is not already open, on the ribbon, click Cable and Harness tab Manage panel Report .
2. On the Report Generator toolbar, click Edit a configuration (.cfg) file.
3. Select Tutorial Files\Cable & Harness\Report Generator\Wire Run List.cfg , and click Open.
4. On the Info tab, click in the input area before the existing text. Enter Modified, followed by a space, at the beginning of the text.
   Note: This information is included in the report only if Print header is selected on the Format tab.
5. On the Filter tab, verify that Wire and Cable Wire are selected as the objects.
6. On the Table tab, scroll to the right. Columns 5 - 10 use link types to get the RefDes and pin name for each wire end.
7. Leave the settings on the Format tab as they are. Then click OK to display the Save As dialog box. Name the file Modified_Wire Run List.cfg, and then click Save.
8. On the Report Generator toolbar, click Create Report.
9. On the Create Reports dialog box, click Add File to List. Then navigate to the Modified_Wire Run List.cfg file in the Report Generator directory, and click Open.
10. Click OK. The report is displayed in the Report Generator.

Previous | Next