Solver message 98301

Message text

** WARNING 98306 ** The polymer density value in the PVT properties of the selected second (B) material is outside the expected range. Typical value: 10^3 kg/m^3. Check the material data and run the analysis again.

Explanation

The value for the melt density is outside the expected range, meaning that it is either too small or too large.

Resolution

• Edit the second material, select the pvT Properties tab and enter a value for the Melt density.
• Select a different material.
• If the material is from the Autodesk Simulation Moldflow materials database, contact Technical Support.