Edit Job Server specific properties inherited by future jobs.
To access this dialog, click 
(), and then click 
Properties.
Note: To change the temporary directory, reinstall Autodesk Simulation Moldflow Adviser and enter the directory you want to use during the installation process.
Dialog elements
| Server address | The network address of the machine which will be running the analyses. You can specify the address using one of the following three methods:
Note: This cannot be configured in Autodesk Simulation Moldflow Adviser, and is statically set to 127.0.0.1 (the local machine).
|
| Displayed name | The name of the server to be displayed in the Job Manager dialog. Note: In Autodesk Simulation Moldflow Adviser This is cannot be configured, and is statically set to "Current Jobs".
|
| Default job priority level | The processor priority that any Autodesk Simulation Moldflow analysis will take on the server. Note: It is not recommend that priority Highest be used on a single CPU machine as this can tie up the system's resources to such an extent that manual intervention in the running of the machine becomes impossible.
|
| Temporary directory | Specify the temporary directory used by the job manager. When you launch an analysis, the Job Manager first copies the study file to the temporary directory, then runs the analysis in that directory, and finally, when the analysis is complete, copies the study file and result files back to the original project directory. Note: To change this directory, you will need to reinstall the Autodesk Simulation Moldflow product and enter the directory you want to use, during the installation process.
|
| Delete temporary files older than | Specify how many days to keep temporary files before deletion. Job Manager temporary files exist in the temporary directory specified in the box above. Enter the amount of days that you want the temporary files written by the Job Manager to be retained. |