Thermoplastics Material dialog-pvT Properties tab

This dialog is used to view the properties of the selected thermoplastics material.

Note: If a property name is shown in red, it indicates that the property has not been tested for this specific material. However, material data from the testing of a comparable generic grade was found to be suitable and has been assigned to this material.

Melt density	Displays the density of the material, in the melt state, as described by the 2-Domain modified Tait PVT model. Melt density is measured at 0 MPa pressure and at the midpoint of the processing temperature range. View or enter the melt density value.
Solid density	Displays the density of the selected material in the solid state as described by the 2-Domain modified Tait PVT model, at 0 MPa pressure and 25 degrees Celsius. View or enter the solid density.
2-domain modified Tait PVT model coefficients	Specifies the data-fitted values for the coefficients in the 2-domain modified Tait PVT model. Click Plot pvT Data to display a plot of specific volume vs temperature at selected pressures for the material.
View/edit test information...	Click this button to view the source of this material data, the date that the data was last modified, the date of testing and the test method that was used for the data. For more information about Autodesk Simulation Moldflow materials data and material testing methods, see Material testing and data fitting.