Creating gates manually using relative coordinates

Before you can create a gate, you must have created at least one injection location on the model.

1. Click (Geometry tab > Feed System panel > Gate). The Create gate dialog appears.
2. Select an injection location from the Select drop-down list.
   Tip: You can also click the relevant injection cone.
3. If necessary, select the Display Grid and/or Snap to grid checkbox.
   Tip: Use the Defaults... button to change the grid properties.
4. Select Define by coordinate.
5. Select the Relative position option.
6. Enter X, Y, and Z coordinates to define the gate/runner intersection point.
7. Click Apply to view the gate.
8. Make changes to the gate or add new gates, as appropriate.
9. Click OK to save gate(s) and close the dialog.