The Quality prediction result is used to estimate the quality of the mechanical properties and appearance of the part. This result is derived from the pressure, temperature, and other results.
The colors displayed in the Quality prediction result indicate the following:
- Will have high quality.
- May have quality problems.
- Will definitely have quality problems.
Quality prediction color code
Note: The Quality prediction result will not be available if there is a short shot. Fix the cause of the short shot before analyzing this result.
Using this result
Check the Confidence of fill result to see how likely it is that the part will fill.
If the Quality prediction result shows that your part will have medium or low quality, use the Results Adviser dialog to open the relevant Help topic and find out how to fix the problem.
Note: You can select which colors to display.
Things to look for
The quality prediction of this part is displayed on the following sliding scale.
| All green | The part quality should be acceptable. |
| Some yellow | The part quality may not be acceptable. As the percentage of yellow increases, the part quality will decrease. |
| Some yellow and red | The part quality is more likely to be unacceptable. As the percentages of yellow and red increase, the part quality will decrease. |