Setting up Pro/ENGINEER® Wildfire® 5.0 for exporting files

Note: If Pro/ENGINEER® Wildfire® 5.0 can not be automatically located by Autodesk Simulation Moldflow Adviser during installation, select the installation location of Pro/ENGINEER® Wildfire® 5.0 in the dialog that is displayed when you install Autodesk Simulation Moldflow Adviser.

1. Open Pro/ENGINEER® Wildfire® 5.0.
2. Ensure the Autodesk Simulation Moldflow Adviser third party component is running. If it is not running, follow the steps below.
   1. Select Tools > Auxiliary Applications.

      The Auxiliary Applications dialog is displayed.

   2. Select Autodesk Simulation Moldflow Adviser from the applications list.
   3. Select Start.
   4. Select Close.
3. Ensure the Autodesk Simulation Moldflow Adviser menu items and toolbar button are visible. If they are not visible, follow the steps below.
   1. Right click any toolbar and select Command.... The Customize dialog is displayed.
   2. Select the Commands tab.
   3. Select Foreign applications in the Categories list.
   4. Drag Autodesk Simulation Moldflow Adviser from the Command list and drop it on any toolbar to insert the toolbar button.
   5. Drag Autodesk Simulation Moldflow Adviser from the Command list to the Applications menu. Drop the item into the opened Applications menu.
   6. Select OK.
4. Open a model or create a new one.
5. Select Applications > Autodesk Simulation Moldflow Adviser or select the Autodesk Simulation Moldflow Adviser toolbar button. Autodesk Simulation Moldflow Adviser launches.