Export for defect visualization

To export your model for defect visualization in Autodesk Showcase, you must have completed an analysis and have results available.

1. Click (Results tab > Export and Publish panel > Defect Visualization) to open the Export for Defect Visualization dialog.
2. Select the cavity that you would like to export. Once selected, the part will be highlighted.
   Note: If you have more than one cavity, each cavity must be exported separately.
3. Click Browse and navigate to the folder in which you would like to save your *.fbx file.
4. Type a unique name in the File name box, then click Save.
5. Decide whether you want to include sink marks or warpage results in your exported file, then in the Include section of the dialog box, click the checkbox next to the appropriate defect. You can include Sinkmark results, Warpage results, both or neither.
6. Select the units you would like to use, and the scale factor.
7. Click Apply to export your file.
8. Click Close close the dialog.

To view your results in Autodesk Showcase, open Showcase, click File > Import Models and navigate to the folder in which you saved your exported file. Select the file, then click Open and the model will appear in the window. Select appropriate materials and lighting to generate a photo-realistic rendering and see whether these defects are significant.