Aligning a part using the Align tool

1. Make sure you have selected the Multi-cavity mold type.
2. Make sure all injection cones are deselected.
3. Click (Geometry tab > Layout panel > Align).
4. Click the injection cone of one part you want to align, then hold down the Ctrl key and click to select the injection cone of the other part(s) you want to align.
5. Select the direction in which you want to move your part from the Alignment direction drop-down box. Then select the part to align with from the Align with part drop-down box.
6. Click Apply to see the result without closing the dialog. Click OK to accept the result and close the dialog.