Solver message 98590

Message text

** WARNING 98590 ** The density value in the filler/fiber properties of the selected material is outside the expected range. Typical value: 10^3 kg/m^3. Check the material data and run the analysis again.

Explanation

The value for the specified material property is outside the expected range, meaning that it is either too small or too large.

Resolution

In your personal database,

• Edit the filler/fiber and change the values for the density.
• Select a different material or filler/fiber.
• If the material is from the Autodesk Simulation Moldflow materials database, contact Technical Support.