Set the default type and size for the cooling channels.
To access this dialog, click 
().
Changing the properties in the Channel properties dialog will also set the default properties for the cooling channel. The new properties will only affect newly-created channels and channels that have been manually selected. Existing channels that have not been selected will not inherit the new properties.
Tip: Selecting one or more cooling circuit segments before accessing this dialog allows you to apply property changes to multiple channels.
Note: If you select Bubbler, you will need to enter both the Outer diameter and Inner diameter values.
Dialog elements
Tip: To change the existing gate properties, select the gate, and then right-click and select Properties.
- Channel type
- Select a channel shape. Note: Although you can use both hot and cold gates with a hot runner system, you cannot use hot gates with a cold runner system.
- Diameter (1)
- Specify the channel diameter.
- Outer diameter (Bubbler)
- Select the outer diameter for the bubbler type channel.
- Inner diameter (Bubbler)
- Specify the inner diameter for the bubbler type channel.