Solver message 99985

Message text

** ERROR 99985 ** The mesh match percentage (match percentage value%), and reciprocal mesh match percentage (reciprocal match percentage value%) for the Dual Domain mesh are less than 50%. The model is therefore unsuitable for analysis. For accurate analysis results, the recommended minimum mesh match percentage is 85%. Remove fine detail and fillets from the model and run the analysis again.

Explanation

This model is unsuitable for a Dual Domain analysis because too much of the model is thick.

Resolution

• Simplify the model to remove text and fillets.
• Perform a 3D analysis on the model.
• Run a mesh match diagnostic on the model and remesh the part with different parameters.