Temperature, mold boundary result

The Temperature, mold boundary result shows the outside surface temperature of the mold, averaged over the cycle.

Using this result

During the Cool analysis, it is assumed that the outside air temperature is 25°C. Therefore, the mold boundary temperature should be evenly distributed. If the mold boundary temperature is not even, then you may need to make the mold bigger or smaller. If the mold boundary result is showing hot regions, then you may need to add more cooling circuits to your design.

Things to look for

• Evenly distributed temperatures
• Hot spots-try to acheive more uniform cooling

Note: Adjustments such as those above can only be made using a licensed Autodesk Simulation Moldflow Adviser or Autodesk Simulation Moldflow Insight product.