** WARNING 307026 ** The specified press open distance is too large. Starting flow simulation when the press touches the initial charge.
The software automatically calculates the press open distance required for the simulation, based on your inputs. The press open distance that you have defined is larger than the press open distance needed to run the compression molding simulation. The automatic calculation will be used for the simulation. The time period where the press moves from the top open position to the position where the press touches the initial charge will not be included in the flow simulation. Only the time and the press displacement result will change to reflect the press moving from the specified open distance to the calculated distance that will be used.
Check your inputs and confirm that the press open distance is correct. If it is, then check the model, charge and other settings.