The Flow front temperature, mold-cavity result shows the temperature of the mold surface at the flow front as it flows through the mold, calculated using the finite element method (FEM), for both dual domain and 3D analyses. This result is generated from a cooling simulation using a Transient Cool analysis.
During a rapid heating and cooling analysis, the mold temperature cycles significantly from hot to cold and back again. As the melt flows through the mold, and comes into contact with the mold surface, the temperature of the melt is affected by the temperature of the mold. The Flow front temperature, mold-cavity result reports the temperature of the mold surface at the time the flow front touches the mold surface.
When viewing the Flow front temperature, mold-cavity result, watch for the following.