Temperature at surface, cold runner result

The Temperature at surface, cold runner result shows the cycle-averaged temperature of the cold runner surface in contact with the mold.

Using this result

Use this result to locate localized hot or cold spots on the model.

Things to look for

• The temperature of the mold should be as close as possible to the analysis target temperature.
• Check whether any hot spots are indicated, and whether they will affect cycle time and part warpage. If there are hot or cool spots, you may need to adjust the cooling channels.

Note: Adjustments such as those above, can only be made using a licensed Autodesk Simulation Moldflow Adviser or Autodesk Simulation Moldflow Insight product.