Specifying the press waiting time
You can set the press waiting time as an optional input for an Injection-compression molding analysis, using Midplane analysis technology.
Specifying when press compression starts
You can control when press compression starts as an optional input for an injection-compression molding analysis using 3D analysis technology.
Specifying the press compression time
The press compression time is the maximum time for press movement (speed control and force control). Once reached, press movement stops, even if the specified press speed and/ or force profiles are not yet complete. After press compression time is complete, the press remains stationary.
Closing the injection location after packing
You can set an option to open or close the injection location after packing, for models with Midplane meshes. For models with 3D meshes, the injection locations are automatically closed after the pack stage of the analysis.
Specifying the compression direction
The compression direction is set as -Z, by default. For models with 3D meshes you can change this to +Z if you prefer.