Overflow wells-gas injection molding (Quick Reference)

Use this dialog to specify settings for gas entrances.

Topics in this section

Overflow Well (Midplane) dialog-Valve control tab
The Valve Control tab of this dialog is used to assign a valve gate controller to the selected overflow well element.
Overflow Well (Midplane) dialog-Mold Properties tab
The Mold Properties tab of this dialog is used to specify the properties of the mold blocks in contact with the selected elements or regions of type Overflow well (Midplane).
Overflow Well (Midplane) dialog-Overmolding Component tab
The Overmolding Component tab of this dialog is used to specify which stage/component in the overmolding process the selected elements or regions of type Overflow well (shell) relate to.
Overflow Well (Midplane) dialog-Overflow Well Properties tab
The Overflow Well Properties tab of this dialog is used to specify the overflow well related properties of the selected elements or regions of type Overflow well (Midplane).
Overflow Well (Beam) dialog-Valve Control tab
The Valve Control tab of this dialog is used to assign a valve gate controller to the selected overflow well element.
Overflow Well (Beam) dialog-Mold Properties tab
The Mold Properties tab of this dialog is used to specify the properties of the mold block in contact with the selected beam elements or curves of type Overflow well (beam).
Overflow Well (Beam) dialog-Overmolding Component tab
The Overmolding Component tab of this dialog is used to specify which stage/component in the overmolding process the selected beam(s) or curve(s) of type Overflow well (beam) relate to.
Overflow Well (Beam) dialog-Overflow Well Properties tab
The Overflow Well Properties tab of this dialog is used to specify the overflow well related properties of the selected beam(s) or curve(s) of type Overflow well (beam).
Overflow Well (3D) dialog-Valve Control tab
The Valve Control tab of this dialog is used to assign a valve gate controller to the selected overflow well element.
Overflow Well (3D) dialog-Mold Properties tab
The Mold Properties tab of this dialog is used to specify the properties of the mold block in contact with the selected tetrahedral elements of type Overflow well (3D).
Overflow Well (3D) dialog-Overflow Well Properties tab
The Overflow Well Properties tab of this dialog is used to specify the overflow well related properties of the selected tetrahedral elements of type Overflow well (3D).

Parent topic: Overflow wells-gas injection molding

Overflow wells - gas injection molding (Procedure)

Overflow wells-gas injection molding (Quick Reference)

Related Tasks