Loads can be applied to both part nodes and elements. When applying nodal loading conditions to a part, the node(s), direction of the load (force), and the magnitude of the load must be specified.
Nodal loads include
Point loads, and
Edge loads.
Topics in this section
Nodal loads (Procedure)
Once you have constrained the model to prevent motion, you need to apply a load to the model in order to deflect the part in a Stress analysis.
Point loading conditions
To simulate the effect that a load would have on post-molding part stresses, you can set a point load on the model.
Edge loading conditions
To simulate the effect that a load would have on post-molding part stresses, you can set an edge load on the model.