QTVR Object Movie Settings Dialog Box

Use this dialog box to specify the number of pan frames and number of tilt frames that are used to export the QuickTime VR object movie.

Note: This dialog box is only available for 3D models.

Pan Settings

Pan Min and Pan Max

Define how far the model can be revolved (as though on a turntable).

Pan Initial

Defines where you view the model from at the start (again, as though on a turntable, 0 or 360 would be the same point at the opposite side and 180 would be where the camera is now).

Pan Frame No.

The number of frames to be used to revolve the model from the Pan Min position to the Pan Max position.

Tilt Settings

Tilt Min and Tilt Max

Define how far the model can be tilted (backwards and forwards from its current position).

Tilt Initial

Defines where you view the model from at the start (assuming you are looking at the model straight, -90 would be from the bottom and 90 from the top).

Tilt Frame No.

The number of frames to be used to tilt the model from the Tilt Min position to Tilt Max position.

 Pointing device:  Export Rendered Image dialog box Type drop-down list QTVR Object Movie and click OK

Parent topic: Reference