|
Identity Data
|
| Description |
A description of the load. |
| Comments |
Specific comments about the load. |
|
Phasing
|
| Phase Created |
The phase when the area load was created. |
| Phase Demolished |
The phase when the area load was demolished. |
|
Structural Analysis
|
| Is Reaction |
Specifies the load is a reaction force. Select this parameter to mark the load as a reaction and become part of the Internal Load category. |
| Load Case |
Specifies the type of load cases. |
| Orient to |
Selects the plane in which to orient the load. This is either the Work Plane or the Project. The Work Plane setting sets the load coordinate system to the work plane. The Project setting sets X to East, Y to North, and Z to up. |
| Fx 1 |
The force in the x direction |
| Fy 1 |
The force in the y direction |
| Fz 1 |
The force in the z direction |
| Fx 2 |
The force in the x direction |
| Fy 2 |
The force in the y direction |
| Fz 2 |
The force in the z direction |
| Fx 3 |
The force in the x direction |
| Fy 3 |
The force in the y direction |
| Fz 3 |
The force in the z direction |
|
Other
|
| Nature |
Displays a user friendly name for the Load Case parameter. |