A curtain wall panel may need an opening in it, such as a vent. You can create an opening by editing the panel as an in-place element.
- Select a curtain wall panel and click Modify | Curtain Panels tabModel panelEdit In-Place.
Note: If you cannot select Edit In-Place, in the drawing area click
(Prevent or allow change of element position) for the panel.
The selected panel is the only geometry available for editing.
- Select the panel.
- To edit the shape of the panel, click Modify | Glass tabMode panelEdit Extrusion.
- In sketch mode, reshape the panel as desired.
For example, you could add a door-like opening to the panel.
- Click Finish Edit Mode.