Modifying Form Profiles

You can edit profiles or paths from which forms have been created.

1. Select a profile, path, or surface to edit. You can select and edit.

   In some cases, such as in sweeps or swept blend, this may be easier in X-Ray Mode.

2. Click Modify | Form Element Mode panel Edit Profile.

   The drawing area will enter a sketching mode. However, forms made from reference geometry will not have a sketch mode and will require direct modification to the reference geometry.

3. Use the drawing tools on the Modify | Form Element > Edit Profile tab to edit the profile. Particularly useful is the Workplane Viewer.
   Note: When editing locked profiles, only the main profile will be editable. Typically this is the profile hosted by a reference level or plane.
4. Click Finish Edit Mode.