| Contour Line Display |
Displays contour lines. If you clear the check box, custom contour lines still display in the drawing area. |
| At Intervals of |
Sets the interval between contour lines. |
| Passing Through Elevation |
Contour intervals are based on this value. For example, if you set the contour interval at 10, contour lines display at -20, -10, 0, 10, 20. If the Passing Through Elevation value is set to 5, lines display at -25, -15, -5, 5, 15, 25. |
|
Additional Contours
|
| Start |
Sets the elevation where additional contour lines begin. |
| Stop |
Sets the elevation where additional contour lines no longer display. |
| Increment |
Sets the interval for additional contour lines. |
| Range Type |
Select Single Value to insert one additional contour line. Select Multiple Values to insert additional incremental contour lines. |
| Subcategory |
Sets the type of contour lines to display. Select a value from the list. To create a custom line style, see Object Styles (On the Object Styles dialog, open the Model Objects tab, and change settings under Topography). |
|
Section Graphics
|
| Section cut material |
Sets the material that displays in a section view. |
| Elevation of poche base |
Controls the depth of the cross-section of earth (for example, –30 feet or –25 meters). This value controls the poche depth for all topography elements in your project. |
|
Property Data
|
| Angle Display |
Specifies the display of angular values on property line tags. You can load property line tags from the Annotations > Civil family folder. |
| Units |
Specifies the units to use when displaying bearing values in the Property Lines table. |