|
Identity Data
|
| Description |
A description of the load. |
| Comments |
Specific comments about the load. |
|
Structural Analysis
|
| Is Reaction |
Specifies the load is a reaction force. Select this parameter to mark the load as a reaction and become part of the Internal Load category. |
| Load Case |
Specifies the type of load cases. |
| Orient to |
Selects the plane in which to orient the load. This is either the Work Plane or the Project. The Work Plane setting sets the load coordinate system to the work plane. The Project setting sets X to East, Y to North, and Z to up. |
| Fx 1 |
The force in the x direction |
| Fy 1 |
The force in the y direction |
| Fz 1 |
The force in the z direction |
| Fx 2 |
The force in the x direction |
| Fy 2 |
The force in the y direction |
| Fz 2 |
The force in the z direction |
| Mx 1 |
The moment about the x axis |
| My 1 |
The moment about the y axis |
| Mz 1 |
The moment about the z axis |
| Mx 2 |
The moment about the x axis |
| My 2 |
The moment about the y axis |
| Mz 2 |
The moment about the z axis |
| Uniform Load |
Specifies uniform or non-uniform load. |
| Projected Load |
Provides the projected load on the projection of a sloped line. |
| Length |
Specifies the length of the line load. |
|
Other
|
| Nature |
Displays a user friendly name for the Load Case parameter. |