Landing Component Type Properties

Landing Types

Landing component types are available from 2 predefined system families:

Type Properties

Name Description
Construction (Monolithic Landing Only)
Monolithic Thickness Specifies the thickness of the landing.
Materials and Finishes
Monolithic Material (Monolithic Landing) Specifies the material used for the landing. Click the value and then click the browse button to open the Materials dialog. See Materials.
Tread Material Specifies the material used for the treads. If the Same as Run option is cleared, you can click this value, and click the browse button to open the Materials dialog.
Treads
Same as Run Select to use the same tread properties as the run type, or clear if you want to specify tread properties specifically for the landing.
Tread Select to include a tread on the landing.
Tread Thickness Specifies the thickness of the tread.
Nosing Length Specifies the amount of the tread depth that overhangs the next tread.
Nosing Profile The profile for a sweep added to the front and/or sides of the tread, depending on the specification for Apply Nosing Profile.

See Creating a Sweep. Revit has predefined profiles to use for the sweep.

Apply Nosing Profile Specifies the nosing edges to which the nosing profile is applied.
Identity Data
See Stair Component Type Properties for Identity Data definitions.