- In the drawing area, select a sketched element.
- If you created the sketch for a sketch-based element, click the edit option to enter sketch mode.
For example, if you sketched a floor, click Modify | Floors tab
Mode panel
(Edit Boundary). Note: Depending on the double-click action specified for Sketched Elements in Options, double-clicking the element may also enter sketch mode. See User Interface Options. - Modify the element:
If you want to then move an entire element select all of its sketch lines, and drag it to the desired location. If another element is attached, it updates accordingly. modify the end of a sketch line select it, and either drag the end control or edit the dimension. If you are moving the end control of a straight line segment, you can change the angle of the line or change the length of the line. If you move the end control of an arc, you change the number of degrees for the arc angle; if you drag the middle control, you change the radius. - If you were in sketch mode, when finished, click
(Finish Edit Mode).