Forward Tool

You use the Forward tool to change the magnification of the model by increasing or decreasing the distance between the current point of view and the pivot point. The distance that you can move forward or backward is limited by the position of the pivot point.

Note: In orthographic views, the Forward tool is limited to the distance between the current position and the pivot point. In perspective views, it is not limited, so you can move the cursor through the pivot point.

To adjust the distance between the current point of view and the pivot point you use the Drag Distance indicator. The Drag Distance indicator has two marks on it that show the start and destination distances from the current point of view. The current traveled distance is shown by the orange position indicator. Slide the indicator forward or backwards to decrease or increase the distance towards the pivot point.

To reorient a view by moving towards or away from the model

1. Display the big Tour Building wheel.
2. Click and hold down the Forward wedge.

   The Drag Distance indicator is displayed.

   Note: If you click the Forward wedge once, the model moves forward 50% of the distance between the current location and the pivot point.
3. Drag the cursor up or down to change the distance from which you view the model.
4. Release the button on your pointing device to return to the wheel.