Controlling Visibility of Linked Worksets in the Host Project

1. Link a workshared model to the host model.
2. In the host model, open a view where you want to see worksets from the linked model.
3. Click View tabGraphics panel (Visibility/Graphics).
4. On the Revit Links tab, do the following:
   1. In the Visibility column, select the check box for the linked model.
   2. Click in the Display Settings column.
5. In the RVT Link Display Settings dialog, do the following:
   1. On the Basics tab, select Custom.
   2. On the Worksets tab, for Worksets, select one of the following values:

      Value	Result
      By host view	If a workset in the linked model has the same name as a workset in the host model, the linked workset displays according to the settings for the corresponding host workset. If there is no corresponding workset in the host model, the linked workset displays in the host view.
      By linked view	A workset that is visible in the linked view (specified on the Basics tab) will be visible in the view of the host model. For more information, see Visibility of Worksets.
      Custom	In the list, select a workset from the linked model to make it visible in the view of the host model.

6. Click OK twice.

Note: A linked workset must be open to display in a host view. See Opening Linked Worksets in the Host Model.