This selection enables a pull down menu of available structural family tags specific to the selected location along the beam. Specific family parameters determine which tags display. Qualifying framing tags must have the following parameters (see Structural Framing Tag Families) to be a viable annotations type:
- Rotate with Component is selected.
- The Attachment Point parameter is set to <None> or matches the position of the desired tag location in the Beam Annotations tool.
For example, structural framing tags which have defined Attachment Point parameters of End are only available to the beam location settings marked <End> in this tool.
Structural framing tags with attachment points of <None> are available to only the Middle location settings provided they rotate with component.
These specifications also apply to the <Load Structural Framing Tag> option, which opens the Load Family dialog (see Loading Families).
To appear in the Structural Framing Tag list, loaded families must follow these guidelines.