Adding Roof Fascia

1. Click Architecture tabBuild panelRoof drop-down (Roof: Fascia).
2. Highlight edges of roofs, soffits, other fascia, or model lines, and click to place the fascia. Watch the status bar for information about valid references.

   As you click edges, Revit treats this as one continuous fascia. If the fascia segments meet at corners, they miter.

3. Click Modify | Place Fascia tabPlacement panel (Restart Fascia) to finish the current fascia and start a different fascia.
4. Move the cursor to a new edge and click to place.

   This different fascia does not miter with other existing fascias, even if they meet at the corners.

5. Click onto white space in the view to finish placing roof fascias.
   

   Crown molding fascia

   Note: Fascia profiles miter correctly only around a square cut roof. The roof in this image was created by running a fascia along the edge of a roof with a Two-Cut Square rafter cut. For information on setting this property, see Creating a Plumb Cut, Two-Cut Plumb, or Two-Cut Square Eave.