View Range Properties

Parameter names, values, and descriptions for view ranges. Values are modifiable.

Name	Description
Top	Sets the upper boundary of the primary range. The upper boundary is defined as a level and an offset from that level. Elements display as defined by their object styles. Elements above the offset value do not display.
Cut plane	Sets a height at which elements in a plan view are cut, such that building components below the cut plane display in projection, and others that intersect it display as cut. Building components that display as cut include walls, roofs, ceilings, floors, and stairs. A cut plane does not cut components.
Bottom	Sets the level of the Primary Range's lower boundary. If you access View Range while viewing the lowest level of your project and set this property to level below, you must specify a value for Offset, and you must set View Depth to a level below it.
View Depth	Sets a vertical range for the visibility of elements between specified levels. In a floor plan, it should be below the cut plane. In a reflected ceiling plan (RCP), it should be above. In a structural plan, View Depth is either below or above the cut plane, depending on View Direction. View Depth is below the cut plane when View Direction is down, and above the cut plane when View Direction is up. See Plan View Direction. For example, if you are designing a multi-story building, you might have a floor plan for the 10th floor that had a depth to the first level. Specifying view depth lets you display visible objects below the current level; such objects include stairs, balconies, and objects visible through holes in a floor. Specifying view depth lets you display visible objects below the primary range with Beyond line style. The view can also be cut at the View Depth plane.